DRV8833 2 Channel DC Motor Driver

Description:
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V.
It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages.
The board ships populated with SMD components, including the DRV8833, and adds an FET for reverse battery protection.
The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in current-limiting, and no need for externally supplied logic voltage.
Features:
Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
Operating voltage: 2.7 V to 10.8 V
Output current: 1.2 A continuous (2 A peak) per motor
Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor Inputs are 3V- and 5V-compatible
Under-voltage lockout and protection against over-current and over-temperature
Reverse-voltage protection circuit

Specifications:-
Operating Voltage: 2.7 Volts
Output Current: 1.2A continuous (2 A peak) per motor
Length: 16mm
Width: 18mm
Heiht: 8mm
Weight: 5g

Package Includes:-
1x DRV8833 2 Channel DC Motor Driver Module
12x Pin Headers

• Output current: 1.2 A continuous (2 A peak) per motor
• Inputs are 3V- and 5V-compatible
• Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
• DRV8833 is a dual H-bridge motor driver
• Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor